MAGNETIC FILTER BARS & RODS, Magnetic bar separators
Magnestic FILTRATION
Get In Touch
MAGNETIC FILTER RODS(MAGNETIC bars,MAGNETIC tubes):
Capture Contaminants, Safeguard Quality — Magnetic Filter Rods, Your Industrial Clean-up Crew.
1. Magnetic filter bars, Magnetic Rods, Magnetic Filter tube (Magnetic Separator) is extremely efficient at removing fine iron contamination from free-flowing products such as sugar, grain, tea, flour, Plastic, liquid, granulate and any other type of powder with low moisture content. As a result, it will protect your equipment and facilities safe and sound, and your products will be safe to sell customers. This item can be supplied with any shape frame or studded end for easy installation.
2. Magnetic filter bars are particularly useful for those engineers who wish to build their own separator units or have severe room restrictions and are not able to accommodate a conventional unit. All product contact parts are made by food-grade 304 or 316 stainless steel tube.
3. The magnetic filter rods with special welding at both ends without leak forever. Welding energy concentrate on the welding line and do not hurt the magnet, maximal protect the magnetic field. The available magnetic area can be expanded to the limited rod surface and without adding any extra magnet. Once welded the rods are finish machined and highly polished.
Dimension, Construction, and Features of
MAGNETIC ROD AND BAR FILTERS
Sinoneo magnetic filter bars & rods offer a range of options to meet your specific needs, from size and strength to construction and end plugs. With our high-quality materials and flexible options, you can be confident in building or modifying your own magnetic separation equipment.
1. Size Variations:
- Diameters: Available from 0.5″ to 4″, with 1″ being the most common.
- Tube Lengths: Ranging from 3″ to 60″ as standard, with custom square magnetic bars available upon request.
2. Material & Magnet Types:
- Constructed from high-grade SUS304 or SUS316 pipe tubes.
- Equipped with:
-High-density ferrite magnets for standard applications.
-High-performance neodymium magnets for stronger requirements.
3. End Plug Options:
- Fully seal-welded design for waterproofing.
- Choice between plain end plugs or tapped end plugs to match your setup.
4. Customizable Magnetic Strength:
- Magnetic field strengths ranging from 1500 to 14000 gauss to suit various applications.
- Ferrite magnet-equipped bars offer over 3,000 gauss surface magnetic force, suitable for temperatures up to 150°C.
- Neodymium magnet-equipped bars provide up to 14,000 gauss on surfaces for enhanced performance.
5. Waterproof Design:
- Ensures functionality in wet and humid conditions.
6. Finish & Maintenance:
- High-polish finish for aesthetics and ease of cleaning.
- Designed for simple maintenance and longevity.
Why us
REASON TO CHOOSE SINONEO MAGNETIC ROD SEPARATOR
Skilled & Trained Personnel
Our team is skilled and committed to excellence. Trust us for reliable expertise.
We Think About client
– Free air shipping package.
– Magnetic power tested and certified.
– Provide all necessary documents and certificates upon request.
Cost Effective Solution For You
We provide customizable magnetic bar separators to meet your specific operational requirements!
Quick Deliver
We can deliver your custom magnetic tube separator in as little as weeks, not months! This will save you both money and time!
Get a free Custom Quote for your BUSINESS now!
Our friendly magnet engineers are here to help you get exactly what you need for retail or industrial purposes, with super high quality & a competitive price.
THE APPLICATION OF
magnetic BAR SEPARATORS
1. Food and Beverage Processing
Magnetic filter rods & bars can be used in the food industry to remove metal contaminants from products such as grains, spices, and powders.
4. RECYCLING AND WASTE INDUSTRY
Magnetic filter bars are an essential component of recycling operations, helping to remove metal contaminants from recycled materials such as glass, plastic, and paper.
7. Water Treatment
High density magnetic bar separators are an effective tool for removing iron, manganese, and other metals from water, making it safe for consumption and other uses.
2. Pharmaceuticals Industry
They are used in pharmaceutical manufacturing to remove metal contaminants from raw materials and finished products, ensuring product safety and purity.
5. CHEMICAL PROCESSING
Magnetic bar filters can be used in chemical processing to remove iron oxide and other contaminants from liquids such as coolants, hydraulic fluids, and lubricants.
8. Textile Industry
Permanent Magnetic tube filters are used in textile manufacturing to remove metal contaminants from fabrics, ensuring product quality and preventing damage to machinery.
3. MINING INDUSTRY
Magnetic filter rods & bars are used in mining to remove tramp metal from minerals, preventing damage to equipment and ensuring product quality.
6. Plastics Manufacturing
The rod magnets filter can be used in plastics manufacturing to remove metal contaminants from plastic pellets, ensuring product quality and preventing equipment damage.
9. Energy Production
Magnetic rod separators can be used in energy production to remove metal contaminants from fuels such as coal and oil, preventing equipment damage and increasing efficiency.
We are a magnetic bars manufacturer and supplier. Our amazing range of magnetic filter rods and bars are versatile tools that can be used in a variety of industries and applications to remove metal contaminants and ensure product safety, quality, and equipment integrity.
Contact us today to learn more about how we can help you harness the power of magnetic filter rods and bars for your business. With our expertise and commitment to quality, you can trust that you are getting the very best magnetic solutions for your application needs.
The Common Specifications of
PERMANENT MAGNETIC FILTER BARS & RODS
The specifications of magnetic filter bars and rods can vary depending on the application. The most common sizes are 10mm, 25mm, and 50mm in diameter, but other sizes are also available. They can be manufactured in lengths ranging from a few inches up to several feet, depending on the specific application requirements.
Magnetic filter bars and rods are available in various sizes and shapes to suit different applications. Common shapes include round, square, and rectangular. The size and shape of the magnet should be selected based on the size of the particle you need to capture and the flow rate of your liquid or gas stream.
If you’re in need of magnetic filter bars and rods, please contact us for information on our products and custom solutions.
ROUND SHAPE MAGNETIC ROD FILTERS
| Model No. | Diameter (mm) | Length (mm) | Surface Flux (Gauss) | Model No. | Diameter (mm) | Length (mm) | Surface Flux (Gauss) |
| SMMF-R-100 | 25 | 100 | 1500-14000GS | SMMF-R-600 | 25 | 600 | 1500-14000GS |
| SMMF-R-150 | 25 | 150 | 1500-14000GS | SMMF-R-650 | 25 | 650 | 1500-14000GS |
| SMMF-R-200 | 25 | 200 | 1500-14000GS | SMMF-R-700 | 25 | 700 | 1500-14000GS |
| SMMF-R-250 | 25 | 250 | 1500-14000GS | SMMF-R-750 | 25 | 750 | 1500-14000GS |
| SMMF-R-300 | 25 | 300 | 1500-14000GS | SMMF-R-800 | 25 | 800 | 1500-14000GS |
| SMMF-R-350 | 25 | 350 | 1500-14000GS | SMMF-R-850 | 25 | 850 | 1500-14000GS |
| SMMF-R-400 | 25 | 400 | 1500-14000GS | SMMF-R-900 | 25 | 900 | 1500-14000GS |
| SMMF-R-450 | 25 | 450 | 1500-14000GS | SMMF-R-950 | 25 | 950 | 1500-14000GS |
| SMMF-R-500 | 25 | 500 | 1500-14000GS | SMMF-R-1000 | 25 | 1000 | 1500-14000GS |
| SMMF-R-550 | 25 | 550 | 1500-14000GS | SMMF-R-1500 | 25 | 1500 | 1500-14000GS |
Other diameter and length can be made as your requst.
SQUARE SHAPE MAGNETIC ROD FILTERS
| Model No. | Square (mm) | Length (mm) | Surface Flux (Gauss) | Model No. | Diameter (mm) | Length (mm) | Surface Flux (Gauss) |
| SMMF-S-100-01 | 25×25 | 100 | 1500-14000GS | SMMF-S-100-02 | 50×50 | 100 | 1500-14000GS |
| SMMF-S-200-01 | 25×25 | 200 | 1500-14000GS | SMMF-S-200-02 | 50×50 | 200 | 1500-14000GS |
| SMMF-S-300-01 | 25×25 | 300 | 1500-14000GS | SMMF-S-300-02 | 50×50 | 300 | 1500-14000GS |
| SMMF-S-400-01 | 25×25 | 400 | 1500-14000GS | SMMF-S-400-02 | 50×50 | 400 | 1500-14000GS |
| SMMF-S-500-01 | 25×25 | 500 | 1500-14000GS | SMMF-S-500-02 | 50×50 | 500 | 1500-14000GS |
| SMMF-S-600-01 | 25×25 | 600 | 1500-14000GS | SMMF-S-600-02 | 50×50 | 600 | 1500-14000GS |
| SMMF-S-700-01 | 25×25 | 700 | 1500-14000GS | SMMF-S-700-02 | 50×50 | 700 | 1500-14000GS |
| SMMF-S-800-01 | 25×25 | 800 | 1500-14000GS | SMMF-S-800-02 | 50×50 | 800 | 1500-14000GS |
| SMMF-S-900-01 | 25×25 | 900 | 1500-14000GS | SMMF-S-900-02 | 50×50 | 900 | 1500-14000GS |
| SMMF-S-1000-01 | 25×25 | 1000 | 1500-14000GS | SMMF-S-1000-02 | 50×50 | 1000 | 1500-14000GS |
| SMMF-S-1500-01 | 25×25 | 1500 | 1500-14000GS | SMMF-S-1500-02 | 50×50 | 1500 | 1500-14000GS |
Other width and length can be made according to your request.
HAVEN’T FIND WHAT ARE YOU LOOKING FOR?
If you have not yet found what you are looking for then you can simply click “CONTACT US” for expert technical advice.Sinoneo is the professional magnetic filter bars, magnetic filter rods manufacturer and supplier in China. Our magnet engineers will help you get exactly what you need – for your retail or industrial applications – in a short time with high quality at a better price.
how to
order your custom magnetic filter bars?
1. Confirm the size
1.Diameter: Our diameters are available in a series, with each diameter corresponding to a specific maximum gauss value. The relationship between diameter and maximum gauss value is shown below:
| 6000 Gs | 7000 Gs | 8000 Gs | 10000 Gs | 11000 Gs | >12000 Gs |
| Ø16 | √ | ||||
| Ø19 | √ | √ | |||
| Ø22 | √ | √ | √ | ||
| Ø25 | √ | √ | √ | √ | √ |
| Ø28 | √ | √ | √ | √ | √ |
| Ø32 | √ | √ | √ | √ | √ |
| Ø38 | √ | √ | √ | √ | √ |
| Ø50 | √ | √ | √ | √ | √ |
| Ø63 | √ | √ | √ | √ | √ |
| Ø100 | √ | √ | √ | √ | √ |
We highly recommend using a diameter of 25mm (1″). It’s the perfect size for the job!
2. Length: We’ll make it to any length you need!
2 Calculate Magnetic Field Strength (Surface Gauss)
Finite element models are great at calculating the strength of a magnetic field—but the process can be a little complex and time-consuming. So, as a practical solution, we often use these values:
| Dry Powder | 7000-8000 Gauss |
| Wet Slurry | 9000-10000 Gauss |
| Nanometer Particles | Over 12000 Gauss |
By using these values, we can estimate the strength of a magnetic field for various materials and applications. However, it’s important to note that actual field strength may vary depending on factors such as magnet size, distance, and orientation. Therefore, it’s always best to consult with experts in magnetic technology to ensure accurate and reliable results.
3.Designing the installation of magnetic rods
- Each end of the magnet has tapped threaded holes for easy installation.
- One end of the magnet has a threaded hole, while the other end is plain and welded.
- Both ends of the magnet are plain and welded.
- And more…
The installation endplug can be customized to meet your specific requirements, with options such as taped holes, threaded studs, tapered end, or plain ends available. Whatever your needs may be, we can provide the appropriate endplug to ensure a seamless installation process.
4. Selecting Stainless Steel Sleeving
| SS304 | Widely used in most environments |
| SS316/316L | It is more resistant to corrosion and used in the pharmaceutical and food industries. |
SUS304 is a common material used in many applications due to its versatility and durability. However, for applications that require higher levels of corrosion resistance, SUS316/316L may be a better option. This material is particularly well-suited for use in industries such as food or chemical processing, where it may be exposed to harsh chemicals or high levels of moisture.
If you are unsure which material is best for your specific application needs, please don’t hesitate to contact us. Our team of experts can provide you with recommendations and guidance to help you make an informed decision. At Sinoneo Magnets company, we are committed to ensuring that you receive the best possible materials for your application, and we are always here to help.
5. Confirm the maximum operating temperature
When it comes to selecting the right magnetic filters for your application, temperature considerations are critical. At our company, we offer a variety of magnet series to meet your specific temperature requirements.
Our six series options are designed to suit a range of temperature needs:
- N series – can withstand temperatures of up to 80°C
- M series – can withstand temperatures of up to 100°C
- H series – can withstand temperatures of up to 120°C
- SH series – can withstand temperatures of up to 150°C
- UH series – can withstand temperatures of up to 180°C
- EH series – can withstand temperatures of up to 200°C
Each of these series is engineered to provide reliable performance at the specified temperature range.
6. Determine quantities needed.
We’ve made the price as affordable as possible, based on the quantity you need. The more you buy, the lower the price will be.
FEATURED TYPE OF MAGNTIC ROD FILTER
GET YOUR MAGNETIC TUBE FILTERS TODAY!
MAGNETIC TUBES,MAGNETIC FILTER TUBES
Magnetic tubes(Magnet filter tubes) are also known as Magnetic Separator Rods, Magnetic Filter Bars, and Magnetic Filter Rods. They are ideal for the extraction of metal particles, such as chips, nuts, nails, staples, etc.
MAGNETIC RODS,MAGNETIC FILTER RODS
Magnetic Rods(Magnet filter rods) provide an effective means of removing ferrous chips and metal particles from loosely packed, free-flowing materials. They are usually constructed of 304 stainless steel tubes or 316 stainless steel tubes.
MAGNETIC BOILER FILTER RODS(BARS)
Magnetic Boiler Filter Rods(Bars) provide an effective means of removing ferrous chips and metal particles from loosely packed, free-flowing materials. They are the most common type of filters for magnetic central heating.
SQUARE MAGNETIC BARS
Square Magnetic bars filter(Magnetic Cartridges)is a special magnetic tube for magnetic separators, so they also called square filter rod magnets. They are super strong magnets that have a neodymium magnet inside a stainless case.
NEODYMIUM ROUND MAGNETIC FILTER BARS
Neodymium Round Magnetic Filter Bars (Rods, Tubes, Cartridges) is extremely efficient at removing fine iron contamination from free-flowing products such as sugar, grain, tea, flour, Plastic, liquid, granulate and any other type of powders.
MAGNETIC FILTERS FOR BOILER WATER TREATMENT
Magnetic Filters For Boiler Water Treatment provide an effective means of removing ferrous chips and metal particles from loosely packed, free-flowing materials.
Don’t let metal contaminants compromise your production. With Sinoneo Magnetic Filter Bars, you can ensure a clean and contaminant-free process, meeting the highest industry standards.
Faq
Maybe What you want to know:
How to clean the magnetic filter bars?
Cleaning magnetic filter bars is a a simple process. All you need is a soft cotton rag or thick cotton gloves to wrap the magnetic bar from one end and smash it to the other. After repeated several times, the metal dust adsorbed on the surface of the bar can be cleaned.
If the surface still has a viscous substance, you can clean it with warm water (below 50°C). The metal dust that sticks to the surface of the magnetic bars should be kept to a minimum, at no more than 10 mm. Regular cleaning is essential to maintain optimal performance and ensure a long-lasting, reliable use.
How Magnetic Bars Work？
Magnetic bars use permanent magnets to generate a magnetic field that attracts and captures ferrous materials. The magnets are enclosed within a stainless steel tube, which makes them super strong and durable. The ends of the tube are sealed through welding, so they’re resistant to moisture and other environmental factors.
When a material containing ferrous impurities passes through the magnetic field, the impurities are attracted to the surface of the bar. This clever little trick allows us to separate the ferrous materials from the rest of the material, which means we can create a cleaner and more refined product.
The strength of the magnetic field generated by the bar depends on the type and strength of the magnets used. Magnetic bars can be customized with different magnet strengths to suit specific applications and material types, which is great because it means we can create the perfect solution for you!
How do I get a free custom quote?
In order to provide you with an accurate quote, we kindly request that you provide us with the following details:
1. Magnet strength: What is the desired surface Gauss value? This will help us determine the appropriate magnet strength for your specific application.
2. Size: Do you require custom sizes or will our standard sizes suffice? If you have a drawing, please send it to us so we can ensure that your filters are made to your exact specifications.
3. Maximum operation temperature: What is the maximum temperature at which your filters will be used? This will help us select the appropriate materials for your filters.
4. Threaded hole: Do you require a threaded hole for easy installation? If so, please let us know the size and location of the hole.
5. Type of stainless steel tube: We offer both 304 and 316 types of stainless steel tubes. Which one is more suitable for your application?
6. Quantities: The more you order, the lower the prices. Please let us know the quantities you require so we can provide you with a competitive quote.
By providing us with this information, we can quickly and accurately provide you with a quote for your magnetic filter bar or rod needs. If you have any questions or need assistance, please do not hesitate to contact us. Our team of experts is always ready to help you find the best solution for your magnetic filtration needs.
What is the range of magnetic strength for magnetic filter bars and rods?
At our customers’ request, we can provide magnetic filter rods and bars with a magnetic strength of up to 14,000GS (1.4T). Please note that the magnetic strength may vary depending on the diameter of the rod or bar and the maximum operating temperature.
For your reference, we have provided a chart below that shows the relationship between the diameter of the rod or bar, the magnetic strength, and the maximum operating temperature. This information can help you select the appropriate magnetic filter rod or bar for your specific needs.
| 0.25T | 0.5T | 0.7T | 0.9T | 1T | 1.1T | >1.2T | |
| Φ 19 (0.75″ ) | √ EH | √ EH | √ EH | √ H | √ M | – | – |
| Φ 22 (0.85″ ) | √ EH | √ EH | √ EH | √ H | √ M | √ N | – |
| Φ 25 (1.00″ ) | √ EH | √ EH | √ EH | √ SH | √ H | √ M | √ N |
| Φ 32 (1.25″ ) | √ EH | √ EH | √ EH | √ SH | √ H | √ M | √ N |
| Φ 38 (1.50″ ) | √ EH | √ EH | √ EH | √ UH | √ SH | √ H | √ M |
| Φ 50 (1.75″ ) | √ EH | √ EH | √ EH | √ UH | √ SH | √ H | √ M |
| Φ 76 (3.00″ ) | √ EH | √ EH | √ EH | √ UH | √ UH | √ SH | √ H |
| Φ 100(4.00″ ) | √ EH | √ EH | √ EH | √ UH | √ UH | √ SH | √ H |
1. The symbol “√” indicates that the item can be manufactured within the diameter range listed in the table, while “-” means it cannot be manufactured.
2. Different series of products are available with varying maximum working temperatures to suit your specific needs:
- N series: Maximum working temperature of up to 80°C
- M series: Maximum working temperature of up to 100°C
- H series: Maximum working temperature of up to 120°C
- SH series: Maximum working temperature of up to 150°C
- UH series: Maximum working temperature of up to 180°C
- EH series: Maximum working temperature of up to 250°C
Please note that the maximum working temperature for each series of products is different, so it’s important to choose the right series based on the requirements of your application. If you have any questions or need help selecting the right product, please don’t hesitate to contact us for assistance.